GUTMANN ROTO T540/10 Fittings
Proven technology for tilt and turn windows
For use in all standard opening types with sash weights up to 130 kg
- Optimum position of the screw axis on hinges and bearings, resulting in convenient and easy assembly
- Offset and corner hinges and their respective bearings can be used on the left or right
- Pre-installed aluminium clamping piece saves time
- Pre-installed fitting components result in fewer parts
- Subsequent adjustment of lateral position (+ 1/- 1) and height (+1,5 /- 1) can be carried out on already-installed fittings
- Attractive appearance: bearing flush with the sash, no visible screws
- Sash dimensions of 1,600 x 2,400 mm (W x H) are available
- Burglar resistance WK 1/RC 1 - WK 3/RC 3
GUTMANN ROTO AVDES Fittings
Completely concealed fitting for large and heavy aluminium windows up to 150 kg
- MCorner bearing installation without drilling or milling the frame
- Time-saving assembly: all parts of the hinge side are clamped to the sash and frame
- 3-dimensional adjustment of contact pressure (+0.8 / -0.8 mm), lateral adjustment (+2 / -2 mm) and height (+2 / -0.5 mm)
- Convenient adjustment, with only two tools, adjustment reserves are visible
- Integrated grease pockets ensure permanent lubrication for less wear, resulting in low maintenance and smooth operation
- Maximum corrosion protection due to a unique surface with RotoSil Nano
- Sash dimensions of 1600 x 2400 mm (W x H) possible
- Burglar resistance WK 1/RC 1 or WK 3/RC 3 are available
GUTMANN Notter AL2000 Fittings
Concealed, continuously clamped fitting parts up to 130 kg
- Complies with DIN standard when used on left or right
- Completely clampable and adjustable
- All parts made from non-rusting materials
- Eccentric bolts at the locking points are also pre-installed. Easily readjusted to ensure optimum contact pressure and seal closure.
- Corner bearings are laterally and vertically adjustable. Adjustments can be made with the window in place, i.e. without removing the sash.
- Arm is attached with punching screws, so no drilling or drill template is required
- Connection of sash parts can be made without any tools, simply mount or insert
- Sash width from 380 mm to 1600 mm; sash height from 500 mm to 2400 mm
